Shema Jelektrochajnika Termosa Official

Most thermopots use two separate heating elements or a single element with two circuits: Main Element ( EK1cap E cap K 1 ): High power (700–900W) for the initial boiling phase. Keep-Warm Element ( EK2cap E cap K 2

): Low power (30–50W) to maintain a constant temperature (e.g., Main Thermostat ( shema jelektrochajnika termosa

Pressing the "Pour" button activates the electric motor pump, which pulls water from the bottom of the internal flask and pushes it through the spout. 3. Comparison with a Standard Kettle Standard Electric Kettle Thermopot (Kettle-Thermos) Power 1500–3000W 700–900W (boil) / 30-50W (warm) Capacity 1–2 Liters 3–5 Liters Insulation Minimal (single wall) High (double-walled with insulation) Dispensing Manual pouring Electric or mechanical pump Tips for Maintenance and Repair Most thermopots use two separate heating elements or

): Monitors the temperature to cycle the smaller heating element on and off. Thermal Fuse ( ): A one-time safety device (usually rated for ~ Comparison with a Standard Kettle Standard Electric Kettle

Never submerge the base or the main body in water, as this will damage the internal circuit boards.

Driven by a small DC motor (often 12V or 18V) powered by a small internal transformer or power supply board.