Nad Phono Preamp Pp2 Manual Apr 2026

Follow these steps to correctly integrate the PP 2 into your audio system:

: If your turntable has a separate ground wire, secure it to the GND thumb screw on the back of the PP 2 to minimize hum. Nad Phono Preamp Pp2 Manual

: Never connect the PP 2 to an input marked "PHONO" on your receiver, as this will cause severe distortion. Follow these steps to correctly integrate the PP

: Connect the external 24V power supply to the PP 2 and plug it into a wall outlet. A green LED on the front panel indicates the unit is powered. 2. Technical Specifications A green LED on the front panel indicates the unit is powered

: Check that all RCA plugs are fully inserted into their respective sockets on both the PP 2 and the amplifier.

Check if the . If not, verify the power supply connections. Ensure the correct input is selected on your amplifier. Hum or Buzz :

Move the PP 2 away from other equipment (like power transformers) to reduce interference.