: For diode lasers, the origin is usually the bottom-left corner. If your laser has limit switches, enable Auto Home on Startup . 2. Design Your Piece
: Manufacturers typically use millimeters (mm). It is recommended to switch your units to mm/min for diode lasers or mm/sec for CO2 lasers. lightburn-1-3-01-vollversion
For a detailed step-by-step walkthrough, the LightBurn Documentation provides an excellent guide for creating your first name tag project. : For diode lasers, the origin is usually
Before designing, ensure your software is communicating correctly with your laser hardware. Design Your Piece : Manufacturers typically use millimeters
: Double-click a layer to open the Cut Settings Editor . Here, you set the Speed and Power based on your material (e.g., wood, acrylic). Use a lower speed and higher power for cutting, and a higher speed with lower power for engraving. 4. Framing and Running the Job
: For complex logos or designs, use the Import function to bring in SVG, DXF, or AI files. If importing from Adobe Illustrator, set the DPI to 72 to ensure the scale remains accurate. 3. Organize Layers and Settings
: This will follow the path of the shape to cut it out or draw an outline.