Hoffman Finish Balancer Manual (2027)

: Disconnect the power source before performing any maintenance or inspection. 2. Machine Setup & Installation

: Stop the wheel by moving the pulley back onto the tire and reversing the pulley's rotation direction. 4. Weight Application & Calibration Use and maintenance manual General Index - Hofmann Megaplan

: Lift the vehicle so the wheel to be balanced can spin freely. Power On : Set the main switch to the "ON" position. Hoffman Finish Balancer Manual

: The machine must touch the floor at its three specific support points for stability.

: Remove the pulley from the tire (about 5–7 cm) and wait for the display to show the unbalance value and angular position. : Disconnect the power source before performing any

: Place the balancer's driving pulley in contact with the tire. Spin Cycle :

) is an "on-car" balancer designed to correct vibration by balancing the entire rotating assembly, including the hub, brake disc, and wheel, while it is mounted on the vehicle. : The machine must touch the floor at

: Do not wear loose clothing with flapping parts or jewelry that could be caught in moving devices.