Choose the .bin file and select "All Code" as the upgrade mode.
Insert the USB into the receiver. Go to Menu > Tools > USB Upgrade . Download File v8honor_02032021.bin
There are two primary methods to install this file, depending on the current state of your receiver. 1. Standard USB Update (Soft Update) Choose the
Place the renamed file on a FAT32 USB drive. Force Boot: Power off the receiver. Insert the USB. There are two primary methods to install this
If the receiver is functional and you are simply updating the version: Ensure it is formatted to FAT32.
System stability, UI improvements, and potential updates to IKS (Internet Key Sharing) or IPTV protocols commonly used by these receivers. Installation & Flashing Procedures
If the receiver is "bricked" (stuck on "Boot" or "Load"), you must use the force-flash method: